DC Drives - 1Ph Input
Low cost DC motor control for Small Permanent Magnet and Brushed DC Motors
1 Phase DC Drives
This comprehensive range of more compact DC Drives offers both non-isolated and isolated drives up to 12.2A output current, suitable for small DC motors up to 1.8kW (2.0HP) output power with an input supply from a single phase.
The full product range is available with a wide range of input voltage options, from the standard 110 – 240VAC or as an option 30V – 60VAC supply DC Drives options able to provide output voltages down to 24VDC. The Sprint 340/680/1220 Series is an ideal low-cost drive solution to control small brushed or permanent magnet DC motors.
At ACDC Drives, we stock all variants of the Sprint Compact Range. With the option of standard 1Q or 4Q Regenerative drives, and also Chassis mountable or DIN mountable, there's a drive to suit everyone.
Not sure which Sprint Drive will do the job? Just drop us an email or a call, we will help spec the correct 1 Ph DC Drive for your application.
The Compact series of Sprint DC Drives provides superb control of DC motors up to 1.8kW in a Control Panel friendly size. The compact DIN rail-mounting package uses less panel space than conventional chassis mount drives. Each drive comes with easy to access drive adjustments together with plug-on screw terminals for easy installation.
Low Voltage Option
The Single Phase series from Sprint are available with 110V – 240VAC input voltage option (for output voltages 90V - 180VDC), or alternatively with a 30V – 60VAC input option (for up to 24V - 48VDC output). These DC Drives provide an ideal match for most common small DC motor windings.
1Q or 4Q Regenerative
Available in non-isolated 1Q, isolated 1Q and 4Q options, the 340/680/1220 series provides a wide range of options for any budget. The 4 Quadrant variant (XRi) regenerative DC motor controller gives a fast controlled response over the full forward/reverse speed range for motoring and braking. This improves energy efficiency by regenerating energy into the mains supply whilst under braking.
Sprint Compact Standard Features: All Models
- 340 controller for DC motors rated up to 3.4 Amps (0.55KW/0.75HP)
- 680 controller for DC motors rated up to 6.8 Amp (0.75KW/1HP)
- 1220 controller for DC motors rated up to 12.2 Amps (1.8KW/2HP)
- DIN rail mounting
- Easy to access drive adjustments
- Plug-on screw terminals
- Small footprint
- UL, CuL and CE approved
- Max motor speed
- Min motor speed
- IR comp
- Max motor current
340XRI, 680XRI, 1220XRI Models
- Built-in current limit protection
- Can be used as a torque controller
- Ramped input +/- Signal terminals
340,680, 1220 Models
- Aux speed trim input available in AVF mode
- Plug in terminals
- Can also drive universal motors
Sprint Electric DC Compact Range
Sprint Chassis Mount 1Q Drives
The Open Chassis-Mount Sprint DC Drives provide a more advanced 1Q option for motors rated up to 3.7/4/8/12/16/32/48A output current (0.55 up to 11kW motor power). The 370, 400, 400i, 800, 1200, 1600i Open Chassis-Mount DC Drives are available with 110-240VAC input as standard (3200i has 240-415VAC input as standard) and a 30-60VAC low voltage option providing 24 – 48VDC output.
All models except the 370 feature the Sprint micro analogue processor which provides many user benefits normally only seen in expensive “high end” products. The Sprint DC micro analogue processor allows for cost saving solutions by meeting the users' exact requirements and enhancing process performance.
Sprint Chassis Mount 4Q Drives
The Open Chassis-Mount Sprint 3600XRi DC Drive is designed to meet the most demanding of process line applications. The advanced 4Q regenerative drive allows motoring and braking in both directions of rotation. Sprint Electric 3600XRi DC Drive provides an option for motors rated up to 36A output current (9.5kW motor power).
The Sprint 3600XRi is available with 110-240VAC (1ph) and 240 – 415VAC (2ph) inputs across the range and both low voltage input options of 30-60VAC and 24-48VAC providing 18 – 48VDC output.
Sprint 340 / 680 / 1220 DC Drives
The Sprint 340, 680 & 1220 Series comprise ultra compact DIN rail mounted 1Q or 4Q DC Drives. This comprehensive range offers both non-isolated and isolated drives up to 12.2A output current, suitable for DC motors up to 1.8kW (2.0Hp) output power.
The product range is available with a wide range of input voltage options, from the standard 110 – 240VAC through to 30V – 60VAC options that can provide output voltage down to 24VDC. The 340/680/1220 Series is an ideal low-cost drive solution to control small brushed or permanent magnet DC motors.
Sprint XLV Series
The Sprint XLV Series is a fast response, linear DC motor speed controller for driving small low voltage brushed DC motors from 2A – 12A output power. The Sprint XLV will motor and brake in both directions of rotation and operates from a single polarity supply, either battery or unregulated DC Source. Excellent performance allows the XLV series to meet the most demanding of applications. The extensive specification includes many standard features not normally associated with a drive the size and cost of the Sprint XLV.