Motors

AC Motors - All Sizes And Types

We offer a range of AC motors from a variety of manufacturers, offering something to suit all requirements. We have access to the largest stock of AC Motors available in the UK, so we can provide a motor from 0.75kW all the way up to 315kW - same day service if required!


 


We offer technical support when you are at the selection phase with your motor, or designing a new application from scratch. Having been involved with many projects and with engineers on hand, we can help with any idea you may have. Our projects so far include Wind Tunnels, Dyno Rigs, Wind Turbines, Hydro-Electric Plants, Factory floor refits and many many more, so we can help.

From standard off the shelf motors to one-off specials designed from scratch for an OEM, we have the motor to suit.

All of our standard stocked motors conform to IEC standards, meaning the mounting points are universal and the frame sizes will match your existing motor if it too is an IEC motor. All of our 3 phase electric motors are rated for use with an inverter.


Single-phase Motors - 110v or 230v

Single Phase motors run from either 110v or a 230v supply. They are supplied mostly into residential markets where the supply is 230v. Due to the fact these motors are a low volume item, they command a slightly higher cost than the equivalent 3 phase version. Single Phase Motors are available in two versions, permanent capacitor or capacitor start capacitor run. Due to the setting, they are used in and the maximum current available, Single Phase motors are usually only available up to 3kW. For more information, please visit this page 'Single Phase Motors'.

3 phase Motors - 415v or 690v

3 phase motors are widely available and are used throughout the world in industrial and commercial settings. All of the 3 phase motors we stock are 100% inverter compatible and have been thoroughly tested by our engineers. With power ratings from 0.25kW all the way through to 315kW, available for next day delivery and the added bonus of having technical support on hand or the ability to have the motor integrated into an inverter package or complete system, we are well placed to suit your requirements.

Special Build Motors

If you require a motor with an insulated front bearing, an elongated shaft, or any other special requirements, we can help. Our lead times are very low and the cost is kept to a minimum due to the contacts we have established. We supply one-off modifications, or batches, just drop us a message or an email and we will usually get you a quote within 24 hours.


How do I Know Which Which Motor I Need?

If you are replacing an existing motor, the motor will usually have a metal plate attached. This plate will differ depending on the manufacturer, but will usually list all of the technical specifications of the motor. From this, we will be able to work out the main parameters and offer a replacement motor. If you can send us a photo we will send you a link to a replacement from our website. We may also need a photo of the motor as the nameplate does not always tell us the mounting type, in order to work this out we need to see the motor in situ.


Motor Plate

Which Motor Have I got? Step by Step...

The two major differences in the motor are the supply, this will either be Single Phase or 3 Phase incoming supply. To check this we recommend isolating the motor first. Once this has been ascertained, the bullet points below will help determine which motor from either the 1P or 3P range you require.


Motor parameters required:
  • Speed (number of poles 2, 4, 6 or 8)
  • Frame Size
  • Mounting
  • Power (kW or HP)
  • Voltage
  • Any special requirements - Double shaft, force vent etc

Motor TEC

TEC Motors

TEC are well known all over the UK for their affordable motors and fantastic service. Since 2006 TEC have set the trend in the UK market and become the largest Motor stockist. Aside from the standard Aluminium or Cast Iron offerings, we can also supply TEC motors with optional paint finishes, IP rating upgrades, Encoder fitting special voltage rewinds and more. We can supply the entire range of TEC motors on the same day service.

Motor UM

Universal Motors

Our latest addition to the range, the Universal Motors brand is huge on the continent. With the manufacturing plant based in Portugal, Universal have focused not only on supplying standard motors which move in large volumes but have kept the ability in their production to respond swiftly and efficiently to the demands for low run volumes on special motors. This enables ACDC Drives to offer one-offs, or modified motors at a very reasonable cost, on much quicker lead times than our competitors. Try us, you WILL be surprised.


Why Buy Motors from ACDC Drives?

We use these motors daily, so our knowledge is real and first hand. We design systems and retrofit motor to existing systems. We are also specialists in supplying replacement systems for existing DC setups with fully functioning Ac systems. If you require any help with motors call our sales team today by phone on 01905 887 667.