No products in the cart.
Manufacturer
Power kW
Power HP
Phases
Input Voltage
Price (£)
-
Quick View
Commander C300 0.25kW AC Inverter (STO) - 230VAC 1Ph Input - C300-01200017
Control Techniques
£143.62
Quick View
Quick View
Commander C300 - 0.37kW AC Inverter (STO) - 230VAC 1Ph Input - C300-01200024
Control Techniques
£153.19
Quick View
Quick View
Quick View
Quick View
Quick View
Quick View
Quick View
Quick View
Quick View
Quick View
Quick View
Quick View
Quick View
Quick View
Quick View
Quick View
Quick View
Quick View
Quick View
Quick View
Quick View
Commander C200
AC Induction VSD 0.25 kW – 132 kW 100V | 200V | 400V
Commander C200 Benefits
The new Commander C200 series is built on 6 generations of knowledge to meet advanced requirements in a wide range of applications and provide optimum user experience. Commander C200 is a robust, cost-effective AC motor speed controller that delivers performance with simplicity and ease of use. Control Techniques open design architecture allows communication with most common protocols via plug-in option modules, including Ethernet, EtherCAT, PROFINET, PROFIBUS, CANopen and DeviceNet, and the AI-485 Adaptor option connects to RS485 networks using Modbus RTU. For enhanced control, Commander C200 also features an onboard PLC.
Commander C200 Features
Main Features of the Commander C200 Inverter
- For a quick motor setup all parameters are printed on the front of the drive so you can be up and running within seconds
- Fixed boost motor control set as default for easy commissioning
- Enhanced control with RFC-A mode to stabilize running speed under variable load
- More control, less cost with on board PLC and built-in independent PID control
- Ease of integration to external PLC or other management systems through powerful networking options
- Reliability achieved with conformal coated PCBs and ingress-resistant patented airflow system
- Rapid diagnostics with Diagnostics Tool app for mobile device
- Fast task based commissioning and easy maintenance with Connect software
Commander C300
AC Induction VSD 0.25 kW – 132 kW 100V | 200V | 400V
Commander C300 Benefits
The new Commander C300 series is built on 6 generations of knowledge to meet advanced requirements in a wide range of applications and provide optimum user experience. Commander C300 is a robust, cost-effective AC motor speed controller that delivers performance with simplicity and ease of use. The drive adds a dual Safe Torque Off (STO) input, certified to SIL3/PLe safety rating and compliant with EN/IEC 61800-5-2. The open design architecture allows communication with most common protocols via plug-in option modules, including Ethernet, EtherCAT, PROFINET, PROFIBUS, CANopen and DeviceNet, and the AI-485 Adaptor option connects to RS485 networks using Modbus RTU. For enhanced control, Commander C300 also features an onboard PLC.
Commander C300 Features
Main Features of the Commander C300 Inverter
- For a quick motor setup all parameters are printed on the front of the drive so you can be up and running within seconds
- Fixed boost motor control set as default for easy commissioning
- Enhanced control with RFC-A mode to stabilize running speed under variable load
- Onboard safety with dual Safe Torque Off certified to SIL3/PLe
- More control, less cost with on board PLC and built-in independent PID control
- Ease of integration to external PLC or other management systems through powerful networking options
- Reliability achieved with conformal coated PCBs and ingress-resistant patented airflow system
- Rapid diagnostics with Diagnostics Tool app for mobile device
- Fast task based commissioning and easy maintenance with Connect software
Commander C Series Typical Use
Pumping, Ventilating & Compressing
- Improved energy efficiency during periods of low demand
- On board PLC & PID functionalities make advanced control easy and efficient without the need of an external controller
- Skip Frequencies allow users to easily avoid equipment resonant frequencies, reducing high vibration levels
- Supply Loss Ride Through will keep the drive up and running through most power outages
Conveying
- Accurate remote speed control with fieldbus communications
- S-ramp acceleration / deceleration profiling provides smooth speed transitions minimizing machine jerk
- Overload capacity up to 180% to add stability
- Avoids early wear and tear of the equipment
Lifting, Hoisting & Winching
- Adjustable mechanical brake sequencing with torque proving function – no need for an external controller
- Embedded PLC functionality can manage local I/O reducing the need for an external controller
Access Control
- Smooth motion with enhanced open loop control
- Small physical size allows the drive to be mounted easily in smaller control cabinets
- Highly reliable in harsh environments, providing long lasting service
Processing (Mixers, Crushers, Agitators, Centrifuges, Extruders)
- Ease of integration to external PLC or other management systems through powerful networking options
- Conformal coating for enhanced environmental protection
- Overload capacity up to 180%
- Highly stable motor control
Profibus Module 
SI-Profibus
Ethercat Module 
SI-Ethercat
Ethernet Module 
SI-Ethernet
DeviceNet Module 
SI-DeviceNet
ProfiNet Module 
SI-ProfiNet
AI-485 Module 
AI-485
Need Assistance Working Out Which Commander C Inverter You Require?
If you need specialist components or just a hand to work out which drive would suit what you need then give us a call on 01905 887 667. Our staff are available during office hours and will be happy to help you with any questions.
About Us
Units 96 C & D
Blackpole Trading Estate
Blackpole Road
Worcester
WR3 8TJ
- 01905 887 667
- sales@acdcdrives.co.uk
Trade Accounts Welcomed
Trade accounts welcome. Apply today for yours!
Copyright © 2012 ACDC Drives Ltd. All Rights Reserved.
