How is it possible that a motor can be used for both 230VAC and for 415VAC? Or even for 415VAC and 690VAC?
Motors are usually dual wound and can be configured in either Star or Delta. You will need to check which is required for your specific application, but one of the most common questions we get asked is how to swap from one to the other…
Well, now you can watch a 2-minute tutorial that will show you exactly how to make the swap from Star to Delta or from Delta to Star!
PLEASE NOTE: If you are using a 3 Phase Motor with one of our 230VAC Inverters and running them from a 230VAC supply, you will need to swap the motor windings to Delta for the motor to run.