Square Frame Worm Gearbox - For Motor Size 63 0.06kW

17rpm Output - 16Nm

Input RPM

1400 RPM

Ratio

80.0:1

Output Speed

17.50 min-1

Motor Power |Torque

0.06kW | 16Nm

Service Factor

1.0

Output Diameter

Standard ø14mm

Input Flange

63 B14 ø80

Output Bore

Standard ø9mm

Technical Details

Lubrication

Unit Q30 is supplied with synthetic oil (SHELL Omala S4 WE 320), providing “long life” lubrication. For standard mounting orientations 0.03l is the fill amount.

Weight(kg)	Width	Height	Length
4.0kg	55mm	101.5mm	97mm

Single-piece aluminum alloy housing

UIs vacuum impregnated (MIL-STD 276) for protection and sealing. No secondary finish required but readily accepts paint. Combines light weight with high tensile strength. Precision machined for alignment of bearings and gearing.

Oversized bearings

Support positively-retained, high speed shaft for higher shock load capacity - ideal for frequent starting and reversing application. Premium, Nitrile® high temperature seals each end.

Impregnated and machined bearing caps

With exterior machined surfaces enable a variety of mounting accessories. Extra-deep thread engagement provided for greater support strength. Zinc plated hardware.

Single piece alloy steel input shaft and worm shaft

High helix angle worm is case-hardened (Rc 58-60), ground, teeth are profiled and radiused, for noise reduction and enhanced efficiency.

80:1 | 17rpm | 16Nm For 0.06kW B14 Motor Square Worm Gearbox

Have a question?