VIPA 972-0DP10
ProfiBUS Connector With Diagnostic LEDs
Connects PROFIBUS net components to a PROFIBUS line.
VIPAs Profibus Connectors feature an all-metal-housing and diagnostic LEDs for quick evaluation of Profibus system faults. An integrated PG port is also available to allow convenient connection to a PC or diagnostic tool.
The PROFIBUS connector with LEDs has the following features:
- Four Diagnostic LEDs
- Rugged, All Metal Casing for Low Noise Interference
- Integrated PG Port
- Switchable Terminating Resistor
- EasyConn fast connection via integrated cutting clamps
- 90 Degree Orientation
Datasheet
Download the PROFIBUS 9720DP01 Connector Specifications sheet
| Light | Color | State | Condition |
|---|---|---|---|
| PWR | Green | ON | Power Supply is OK |
| Off | Power Supply fault | ||
| Flashing | Initial self-test | ||
| TXD | Green | Flashing | Active communication |
| Off | No communication detected | ||
| Term | Green | Off | Termination Switch is Off |
| On | Termination Switch is On | ||
| Flashing | Defective termination resistor | ||
| ERR | Yellow | Off | No errors detected |
| On | Incorrect termination or poor connection | ||
| Flashing | Signal levels are out of the defined range |
Direct Replacement For:
- Siemens 6ES7 972-0BA52-0XA0
- Siemens 6ES7 972-0BB52-0XA0
- Helmholz 700-972-7BB12
- Helmholz 700-972-0FB50
- Profichip PA003135
- Phoenix Contact 2313685
- Molex/Woodhead PA9D01-42
- Molex/Woodhead 120103-0001
- Molex/Woodhead WM4836