Commander Inverter

Commander C200

AC Induction VSD 0.25 kW – 132 kW 100V | 200V | 400V

Commander C200 Benefits

The new Commander C200 series is built on 6 generations of knowledge to meet advanced requirements in a wide range of applications and provide optimum user experience. Commander C200 is a robust, cost-effective AC motor speed controller that delivers performance with simplicity and ease of use. Control Techniques open design architecture allows communication with most common protocols via plug-in option modules, including Ethernet, EtherCAT, PROFINET, PROFIBUS, CANopen and DeviceNet, and the AI-485 Adaptor option connects to RS485 networks using Modbus RTU. For enhanced control, Commander C200 also features an onboard PLC.

Commander C200 Features

Main Features of the Commander C200 Inverter

  • For a quick motor setup all parameters are printed on the front of the drive so you can be up and running within seconds
  • Fixed boost motor control set as default for easy commissioning
  • Enhanced control with RFC-A mode to stabilize running speed under variable load
  • More control, less cost with on board PLC and built-in independent PID control
  • Ease of integration to external PLC or other management systems through powerful networking options
  • Reliability achieved with conformal coated PCBs and ingress-resistant patented airflow system
  • Rapid diagnostics with Diagnostics Tool app for mobile device
  • Fast task based commissioning and easy maintenance with Connect software
C200

Commander C300

AC Induction VSD 0.25 kW – 132 kW 100V | 200V | 400V

C300

Commander C300 Benefits

The new Commander C300 series is built on 6 generations of knowledge to meet advanced requirements in a wide range of applications and provide optimum user experience. Commander C300 is a robust, cost-effective AC motor speed controller that delivers performance with simplicity and ease of use. The drive adds a dual Safe Torque Off (STO) input, certified to SIL3/PLe safety rating and compliant with EN/IEC 61800-5-2. The open design architecture allows communication with most common protocols via plug-in option modules, including Ethernet, EtherCAT, PROFINET, PROFIBUS, CANopen and DeviceNet, and the AI-485 Adaptor option connects to RS485 networks using Modbus RTU. For enhanced control, Commander C300 also features an onboard PLC.

Commander C300 Features

Main Features of the Commander C300 Inverter

  • For a quick motor setup all parameters are printed on the front of the drive so you can be up and running within seconds
  • Fixed boost motor control set as default for easy commissioning
  • Enhanced control with RFC-A mode to stabilize running speed under variable load
  • Onboard safety with dual Safe Torque Off certified to SIL3/PLe
  • More control, less cost with on board PLC and built-in independent PID control
  • Ease of integration to external PLC or other management systems through powerful networking options
  • Reliability achieved with conformal coated PCBs and ingress-resistant patented airflow system
  • Rapid diagnostics with Diagnostics Tool app for mobile device
  • Fast task based commissioning and easy maintenance with Connect software

Commander C Series Typical Use

Compressor

Pumping, Ventilating & Compressing

  • Improved energy efficiency during periods of low demand
  • On board PLC & PID functionalities make advanced control easy and efficient without the need of an external controller
  • Skip Frequencies allow users to easily avoid equipment resonant frequencies, reducing high vibration levels
  • Supply Loss Ride Through will keep the drive up and running through most power outages
Conveyor

Conveying

  • Accurate remote speed control with fieldbus communications
  • S-ramp acceleration / deceleration profiling provides smooth speed transitions minimizing machine jerk
  • Overload capacity up to 180% to add stability
  • Avoids early wear and tear of the equipment
Lift

Lifting, Hoisting & Winching

  • Adjustable mechanical brake sequencing with torque proving function – no need for an external controller
  • Embedded PLC functionality can manage local I/O reducing the need for an external controller
Arm_Barrier

Access Control

  • Smooth motion with enhanced open loop control
  • Small physical size allows the drive to be mounted easily in smaller control cabinets
  • Highly reliable in harsh environments, providing long lasting service
Mixer

Processing (Mixers, Crushers, Agitators, Centrifuges, Extruders)

  • Ease of integration to external PLC or other management systems through powerful networking options
  • Conformal coating for enhanced environmental protection
  • Overload capacity up to 180%
  • Highly stable motor control

Profibus Module Profibus

SI-Profibus


Ethercat Module Ethercat

SI-Ethercat


Ethernet Module Ethernet

SI-Ethernet


DeviceNet Module DeviceNet

SI-DeviceNet


ProfiNet Module ProfiNet

SI-ProfiNet


AI-485 Module AI-485

AI-485



Need Assistance Working Out Which Commander C Inverter You Require?

If you need specialist components or just a hand to work out which drive would suit what you need then give us a call on 01905 887 667. Our staff are available during office hours and will be happy to help you with any questions.